Rust Grip®-E- (Epoxy) same as Moist Metal Grip except with added metallics for toughness and heat.Learn More >

Multi Mesh Membrane- polyester membrane used with Super Base (HS) for more difficult areas to spread over and seal before coating with Super Therm®.Learn More >

SP Texture Coating- single component water-based coating containing a mixture of high-performance ceramics and acrylics specially blended for breathability, adhesion, flexibility, and toughness. Additional lightweight aggregate compound is added into the formulation to ensure a texture yet having added characteristics not found in standard dry mix ratios of stucco. SP Texture Coat was designed to coat a variety of surface structures on metal, wood, stone, concrete, fiberglass or composites.Learn More >

SP Seal Coat- single component water-based coating used as a top coat over Super Therm®, HPC® Coating, or other base materials to seal the surface for moisture protection. It remains flexible and is resistant to mold and mildew.Learn More >

SP HT Metal Sealer- single component water-based coating using specific ceramic fiber loads to prevent corrosion and CUI for application directly on high heat metal surfaces at temperatures of 392 to 1112 degrees F. The coating must be applied while the surface is hot to achieve dry down and full curing.Learn More >

Enamo Grip 5000- two component polyester high solids coating for protection against vapors, acid rain, and other harsh chemical environments while giving a car-like finish and UV protection. Can withstand Skydrol® hydraulic fluids used in aircraft when applied to flooring. Available in clear and custom colors.Learn More >

Solar Shield- single component water-based reflective coating made with acrylics but using our highest quality of reflective ceramic compounds to outperform all similar “reflective” coatings advertised in the market. Not as long lasting as Super Therm® or Sunshield, but does a great job of repelling the initial radiation heat on the surface it covers.Learn More >

SP Seal Coat HT- single-component water-based coating used as a top coat over HPC® Coating or other base materials to seal the surface for high heat temperatures up to 500 degrees F and for moisture protection. It remains flexible and is resistant to cycle water sprays.Learn More >

HPC® HT Coating- two component coating designed to be sprayed directly to hot surfaces while in operation and to insulate hot pipes or surfaces that load up to 450 to 1112 degrees F. HPC®-HT Coating mixes a large water-based Part A with a flammable smaller Part B that becomes non-flammable when ready to use and spray. The resins must be sprayed while the surface is hot to achieve dry down and full curing.Learn More >

SP Interlock- single component water-based coating containing a combination of non-acidic water-soluble agents, which penetrate through the open pores of aged concrete. SP INTERLOCK sets up a chemical reaction (within the concrete) with the salts and limes present. Unlike other sealants, SP Interlock works from the inside out. This is not a surface sealant. SP Interlock works to replace solids lost by age and weathering.Learn More >