SP APC Strippable- single component non-stick coating designed to be applied over metal, glass, or plastics and adhere until the coating is cut on the edge and can be pulled or peeled off in one sheet. Specifically designed for use over aircraft canopy and instrument panels for the application of Super Therm®. This strippable allows the coating system to stay in place, then cut to release surface tension and to remove by simply pulling the entire coating system off within minutes with no residue. This coating has many uses where overspray from other paints is a problem and can be applied over areas needing the protection.Learn More >
SP Wood Box Paint- single component water-based coating made for wood. Applied directly to the wood surface without primer with tannin blockers to resist bleed through and IR blockers for long term weathering and radiation protection.Learn More >
Super Therm®- single component water-based coating for exterior surfaces to block and repel 95% of the radiation heat (UV, Short Wave and Long Wave) and to prevent heat load into the initial surface or envelope of the building or structure. Uses four ceramic compounds designed to match the heat waves from the sun. Used in oil fields and heavy industrial as well as commercial. Has 18 to 20-year life application histories showing no more than 10% loss of performance even after becoming dirty and weathered. Not just a reflective coating. Applied at only 10 mils (thickness of a credit card or business card) to face the sun and prevent the radiational heat from loading onto the surface.Learn More >
Super Base- single component water-based coating used over roofing as a base coat before applying Super Therm®. Used to fill and seal cracks and breaks in the roof substrate. Must have some pitch on the roof and no ponding areasLearn More >
Sunshield- single component water-based reflective coating made with acrylics but using our highest quality of reflective ceramic compounds to outperform all similar “reflective” coatings advertised in the market. Not as long lasting as Super Therm®, but does a great job of repelling the initial radiation heat on the surface it covers.Learn More >
SP Liquid Membrane®- single component true rubber coating sprayed or rolled to offer water protection and provide flexibility over surfaces that move by expansion and contraction – roofs, pipes, etc.Learn More >
Rust Grip®- single component urethane formula applied directly to rust or blasted metal surfaces. 6780 psi surface tensile strength. Pull test results in the field and lab average 1200 psi and in the field over blasted surface at 2200 psi. Extremely tough, anchors itself inside the pores of the metal surface or surface rust to block moisture and air from developing corrosion. Simple to use and extremely effective against all corrosive environments. Applied only to completely dry surfaces.Learn More >
Omega Fire™- single component coating designed to withstand 2200°F / 1204°C direct flame and resist heat transfer to backside. This coating has not obtained UL certification as yet, but has performed many of the UL testing profiles to verify its’ capabilities. Adjustments have been made after all the initial testing to perfect its’ performance, and initial beam testing is scheduled for August 2019. Some initial testing along the way have given up to 7-hour fire rating performance and passed the NYC 2-hour support beam testing as well as fire protection for shipping containers.Learn More >
Moist Metal Grip- two component epoxy formula for corrosion control over condensating or wet surfaces of any kind. Moist Metal Grip can be applied by brush or roller to force the coating into the surface pores, to replace the moisture or water, and to lock down and prevent the combination of moisture and air to allow corrosion to exist or continue. Available in clear, white, and custom colors.Learn More >
Mastic Sealing Tape- self adhesive, polyester reinforced tape used to seal over cracks and flashings.Learn More >