• Solutions

Solar Shield- single component water-based reflective coating made with acrylics but using our highest quality of reflective ceramic compounds to outperform all similar “reflective” coatings advertised in the market. Not as long lasting as Super Therm® or Sunshield, but does a great job of repelling the initial radiation heat on the surface it covers.Learn More >

HPC® HT Coating- two component coating designed to be sprayed directly to hot surfaces while in operation and to insulate hot pipes or surfaces that load up to 450 to 1112 degrees F. HPC®-HT Coating mixes a large water-based Part A with a flammable smaller Part B that becomes non-flammable when ready to use and spray. The resins must be sprayed while the surface is hot to achieve dry down and full curing.Learn More >

Super Therm®- single component water-based coating for exterior surfaces to block and repel 95% of the radiation heat (UV, Short Wave and Long Wave) and to prevent heat load into the initial surface or envelope of the building or structure. Uses four ceramic compounds designed to match the heat waves from the sun. Used in oil fields and heavy industrial as well as commercial. Has 18 to 20-year life application histories showing no more than 10% loss of performance even after becoming dirty and weathered. Not just a reflective coating. Applied at only 10 mils (thickness of a credit card or business card) to face the sun and prevent the radiational heat from loading onto the surface.Learn More >

Sunshield- single component water-based reflective coating made with acrylics but using our highest quality of reflective ceramic compounds to outperform all similar “reflective” coatings advertised in the market. Not as long lasting as Super Therm®, but does a great job of repelling the initial radiation heat on the surface it covers.Learn More >

Omega Fire™- single component coating designed to withstand 2200°F / 1204°C direct flame and resist heat transfer to backside. This coating has not obtained UL certification as yet, but has performed many of the UL testing profiles to verify its’ capabilities. Adjustments have been made after all the initial testing to perfect its’ performance, and initial beam testing is scheduled for August 2019. Some initial testing along the way have given up to 7-hour fire rating performance and passed the NYC 2-hour support beam testing as well as fire protection for shipping containers.Learn More >

HSC™ Coating- single component water-based coating designed to insulate hot pipes or surfaces that load up to 350 degrees F. The coating is not a reflective coating, but works to block the absorption of heat and to resist the transfer of heat through the coating to the cooler side.Learn More >

HPC® Coating- single component water-based coating designed to insulate hot pipes or surfaces that load up to 500 degrees F. The coating is not a reflective coating, but works to block the loading of higher heats and to resist the transfer of heat through the coating to the cooler side. Holds heat in the surface in which it covers. Always ask what the temperature inside the unit is and not the heat on the surface. Once coated, the surface will be equal to the interior temperature which could be 200-300 degrees F higher than what is registering on the exterior.Learn More >